Input voltage

UE

max. +12 V to –12 V (+10 V to –10 V measurable)

Input resistance

RE

200 kΩ ± 5 %

Resolution

5 mV

Non-linearity

%

< 0.2

Calibration tolerance, max. 1)

40 mV (with factory settings)

Current inputs

Channel number

2

Input current

IE

4 mA to 20 mA

Leakage current

Iv

0.1 to 0.4 % (with 100 Ω between pin 2 or pin 3 (Cin1+ or Cin2+) and "AGND"

Resolution

5 μA

Voltage supply for analog sensors via VT-HNC100-C-3X/S

U, I

UB, max. 100 mA at X2A, pin 7 (+24 Vsens)

1)

If the factory settings are insufficient, the measurement technology can be calibrated on site via software in a system-specific way.

Logic level

log 0 (low) ≤ 5 V; log 1 (high) ≥ 10 V to UB, Ie = 20 mA at UB = 24 V

Connection

flexible conductor up to 1.5 mm2

Reference potential for all signals

DGND

Logic level

log 0 (low) ≤ 2 V; log 1 (high) ≤ UB; Imax = 20 mA, maximum load capacity C = 0.047 μF

Connection

flexible conductor up to 1.5 mm2

Reference potential for all signals

DGND

Data width

adjustable 12 to 28 bits

Line receiver/driver

RS485

Voltage supply via VT-HNC100-C-3X/S

U, I

UB, max. 200 mA an X8M, pin 7 (+24 Venc)

Position transducer, EnDat 2.2

Interface (clock and data)

RS485

Voltage supply via VT-HNC100-C-3X/S

U, I

5.25 V ±1 %, max. 400 mA at X8M, pin 6 (+5 Venc) 3.6 to 5.25 V must be applied to the encoder.

Resolution

minimum 10 nm or higher

Reference potential for all signals

EGND

1)

Due to the higher control quality, an SSI transducer with clock synchronization should be used